We are working on Thomas and Kim’s 1969 Chevy Camaro and we have finished the body work underneath the car and have put it back on its suspension. The body panels have all been lined up. The body is in the spray booth fully masked and ready for first primer.
We have just started working on Thomas and Kim’s 1969 Camaro. As with many of our projects this Camaro restoration is a custom restoration process. The car has come to us with some of the work already completed. We are going to be doing some body work underneath the car and then we will be (...)
We are now in the painting stage of Dan’s 1968 Pontiac Beaumont restoration project. We painted the dash and front cowl semi gloss black and once they were dry over the weekend we masked it and painted inside the body shell, firewall and trunk. We then finished sanding the outside of the car with 800-1000 (...)
We finished some body work on Dan’s 1968 Pontiac Beaumont restoration project and all the trim pieces have been fitted. At this stage of the restoration the Beaumont has been through its first primer stage and we are blocking down the primer. We have bolted everything back together before blocking in order to get everything (...)
Here is our last picture of Tony’s 1965 Ford Mustang restoration. It’s been a journey, we started this project in May when this car was in rough shape. We have now put in the motor and bolted the sheet metal back on. We will do the final polish and clean up and it will be (...)
We finished the welding of Dan’s 1968 Pontiac Beaumont and now we are doing some body work. You can see the rear window trim in the picture, all the trim pieces are fitted as the body work is being done so we can make sure we have nice gaps and edges by the time we (...)
Remember Tony’s 1965 Ford Mustang? Tony’s original Mustang was in rough shape, he bought a new reproduction body from Golden Leaf Automotive and we went from there. We didn’t have any rust to deal with but as part of this restoration project there was a lot of fitting and changing panel gaps. We finished all (...)
We are now in the welding stages with Dan’s 1968 Pontiac Beaumont. Dan brought us this car that he has had for over 30 years. We have replaced the inner and outer wheel wells, 1/4 panels, front fenders and repaired the doors. We also cut out all the rusted metal from the doors and sandblasted. (...)
The car has come back from the sandblasters. We are now cutting out the rusted metal on the 1968 Pontiac Beaumont doors. Dan has had this car for over 30 years and to restore it we still have a lot of work to do. Our next step is to complete some body work on the (...)
Here are some more pictures of the 1968 Pontiac Beaumont big block, as you can see we have lots of rust and old patch work to deal with. Dan has had this car for over 30 years and it requires some serious work. Over the next few weeks we will be replacing the inner and (...)
